# Clean assembly to VDA 19.2

> Clean assembly to VDA 19.2: cleanliness zones CG1–CG3, measurements with particle traps and particle counters, audits, construction of clean rooms, workshops.

Adres: https://p4cinternational.com/en/technical-cleanliness/clean-assembly-vda-19-2/

## Clean assembly to VDA 19.2

VDA 19.2 is a guideline of the German Association of the Automotive Industry (VDA) on technical cleanliness in assembly. It describes how the environment, processes, staff and documentation affect the cleanliness of parts and how to limit that effect. We help you meet VDA 19.2: from measurements on the shop floor, through audits, to building zones and workshops.

### Cleanliness zones in assembly

VDA 19.2 divides the assembly environment into cleanliness grades. On our website we use the following designations:

- **clean zone (CG1)** – a separated part of the hall where clean assembly rules apply,

- **clean room (CG2)** – an enclosed room with controlled access and cleanliness, in line with VDA 19.2,

- **cleanroom (CG3)** – a room with filtered air and a cleanliness class to ISO 14644.

### How do we help you meet VDA 19.2?

- **Measurements in the assembly environment** – particle traps to assess particles settling from the air and particle counters to measure airborne particles,

- **Clean assembly audit** – a two-day audit carried out by an experienced technical cleanliness auditor, with a report, an assessment of compliance and recommendations,

- **Building zones** – clean rooms (CG2) in line with VDA 19.2 and cleanrooms (CG3) to ISO 14644,

- **Clean assembly automation** – systems that limit the risk of contamination in line with VDA 19.2,

- **Workshops** – VDA 19.1 and VDA 19.2 in practice for technical cleanliness officers, production and quality staff.

### Related services

- [Technical cleanliness audit](https://p4cinternational.com/en/technical-cleanliness/technical-cleanliness-audit/)

- [Cleanroom construction](https://p4cinternational.com/en/technical-cleanliness/clean-room-construction/)

- [Clean assembly automation](https://p4cinternational.com/en/technical-cleanliness/clean-assembly-automation/)

- [Technical cleanliness training](https://p4cinternational.com/en/technical-cleanliness/technical-cleanliness-training/)

- [Technical cleanliness inspection to VDA 19.1 and ISO 16232](https://p4cinternational.com/en/technical-cleanliness/vda-19-1-iso-16232-cleanliness-inspection/)

- [ISO 14644 cleanliness classes – cleanroom](https://p4cinternational.com/en/technical-cleanliness/iso-14644-cleanroom-classes/)

### Frequently asked questions

What does VDA 19.2 cover?

Technical cleanliness in assembly: the environment, processes, staff and documentation that affect the cleanliness of parts. It supplements VDA 19.1, which describes how to inspect the cleanliness of the parts themselves.

How can I check whether assembly meets VDA 19.2?

With an audit: we measure particles in the assembly environment with particle traps and particle counters, assess the process and documentation, and list non-conformities and recommendations in the report.

Do you build rooms in line with VDA 19.2?

Yes. We design and build clean rooms (CG2) in line with VDA 19.2 and cleanrooms (CG3) to ISO 14644.